Product Cloud
ELEMENT Type 8696 TopControl Positioner

ELEMENT Type 8696 TopControl Positioner

Similar to the Type 8694 except for use on valves with smaller 50mm actuators. Not option for external communication.

Home > Burkert > ELEMENT Controllers > ELEMENT Type 8696 TopControl Positioner
 
ELEMENT Type 8696 TopControl Positioner
Facts at a Glance
Sold by Pack of 1 units
Availability 2 - 4 Weeks A.R.O.
Display Selection Table  Specifications
Literature Literature Link

8694 Digital Electo-Pneumatic Positioner

Integrated Mounting : Process Control Valves.

The Type 8696 is a compact positioner for integrated mounting on pneumatically operated process valves utilizing a Burkert 50mm actuator. Remote setpoint adjustment via a 4-20 mA signal.


A contact-free continuous sensor measures the position of the valve spindle.


Simple installation through automatic tune function and setting through DIP-switch:


  • Close tight function
  • Characteristic curves selection
  • Reversal of effective direction
  • Switching manual /automatic operation
  • Binary input

A software interface can be used for, amongst others, linearisation of the operation characteristics by using free programmable fixed points. The valve position indication is shown through LED components.


As an option an analogue position feedback can be integrated.


PLEASE NOTE: An adapter kit (p/n 673765) is required for connection to Type 2103 valves. Please order the adapter kit below.



411.6
24.885
 Part NumberDescriptionQty/PackDrawing/
Manual
 
8696ELEMENT Type 8696 TopControl Positioner
Solenoid Pilot: 
Position Feedback: 
1
$411.60
Regular Price:
411.6
Qty:
673765Adapter kit 8695-961
$24.89
Regular Price:
24.885
Qty:

Technical Specifications

Material

Body
Cover
Sealing

PPS, stainless steel
PC
EPDM

Power Supply

24 VDC +/- 10%

Ripple

10%, no technical direct current!

Setpoint Setting

4 to 20mA

Output Resistance

180 ohm

Control Medium

Dust concentration
Particle density
Pressure condensation point
Oil concentration
neutral gases, air DIN ISO 8573-1
Class 5 (<40μm particle size)
Class 5 (<10mg/m3)
Class 3 (<-20°C)
Class 5 (<25mg/m3)

Electrical Connection

Multipole

M12, 8-pins

Pilot Air Ports

Push-in connector (external 6 mm or 1/4") or threaded ports G1/8

Stroke Range

3 - 28mm

Position Detection Module

Contact free, wear free

Supply Pressure

0 - 7 bar