Spinner Flasks : CLS-1430
Complete Spinner Flask Assemblies in volumes ranging from 100ml through 8 liters. The height of impeller shaft can be raised or lowered. If processing a micro-carrier based suspension, the dimpled bottom prevents settling of the micro-carrier beads (dimpled bottom available in in sizes up to one liter).
| Facts at a Glance | |
|---|---|
| Sold by | Pack of 1 units |
| Availability | 3 - 4 Weeks A.R.O. |
| Display | Selection Table Specifications |
| Literature |  |
Spinner Flasks : CLS-1430
Glass & PTFE : For Suspension & Micro-Carriers
Microcarrier spinner flasks promote optimal growth of suspension and microcarrier cultures. Indented bottoms, 100mL thru 1000mL, prevent accumulation of microcarrier beads under the impeller paddle. Please note, the 3 liter & large versions does not have a dimpled bottom. The complete system includes a flask with two angled sidearms and a PTFE paddle with glass shaft that adjusts the impeller height through the compression fitting in the cap.
Includes:
- The impeller assembly, consisting of the lower magnetic stir bar, impeller blade and blade holder
- The cap assembly, consisting of the corresponding screw cap, liner and compression fitting
- The Glass Shaft and Silicone Plug
- The Caps and Pouring Rings for each Side Arm
Contact PAW BioScience for all your laboratory cell culture equipment needs and check back here frequently as we expand the product offering with more high quality ChemGlass equipment!
| Part Number | Description | Qty/Pack | Drawing/ Manual |
|---|
Specifications:
Part Number |
Capacity (mL) |
Center Neck Size |
Sidearm Size |
OD x OAH (mm) |
|---|---|---|---|---|
CLS-1430-100 |
100 |
70 |
GL-32 |
70 x 175 |
CLS-1430-250 |
250 |
70 |
GL-32 |
85 x 210 |
CLS-1430-500 |
500 |
70 |
GL-45 |
110 x 250 |
CLS-1430-1L |
1000 |
100 |
GL-45 |
135 x 305 |
CLS-1430-3L |
3000 |
100 |
GL-45 |
165 x 355 |
Replacement Components
Flask Capacity (mL) |
|---|
100 & 250 |
500 |
1000 |
3000 |
6000 |
8000 |
Impeller Assembly |
Price |
|---|---|
$43.26 |
|
$54.85 |
|
$94.25 |
|
$94.25 |
|
$170.00 |
|
$170.00 |
Replacement Glass Shaft |
Price |
|---|---|
$5.08 |
|
$5.08 |
|
$5.08 |
|
$8.11 |
|
$8.11 |
|
$8.11 |
Cap Assembly |
Price |
|---|---|
67.98 |
|
67.98 |
|
69.01 |
|
69.01 |
|
70.00 |
|
70.00 |
Replacement Parts
Part Number |
Description |
Qty/Pack |
Price |
|---|---|---|---|
Silicone O-Ring for 7mm Compression Fitting, FDA Grade |
10 |
$10.30 |
|
Silicone O-Ring for 9mm Compression Fitting, FDA Grade |
10 |
$13.00 |
|
Stir Bar Magnet Only, 50mL-500mL Spinner Vessels |
1 |
Call |
|
Stir Bar Magnet Only, 1,000mL-3,000mL Spinner Vessels |
1 |
Call |
|
Stir Bar Magnet Only,6,000mL-36,000mL Spinner Vessels |
1 |
Call |
|
7mm Black Compression Fitting |
1 |
$11.33 |
|
Silicone Plug Stoppers, 7mm |
1 |
$9.27 |
|
9mm Black Compression Fitting |
1 |
$14.00 |
|
Silicone Plug Stoppers, 9mm |
1 |
$16 |
|
Spinner Cap Gasket, FDA Grade Silicone, 70mm Cap |
1 |
$4.30 |
|
Spinner Cap Gasket, FDA Grade Silicone, 100mm Cap(7mm) |
1 |
$5.60 |
|
Spinner Cap Gasket, FDA Grade Silicone, 100mm Cap(9mm) |
1 |
$5.90 |
Ⓒ Copyright 2019, Avantor Fluid Handling LLC